Submit
Products | Brushless DC Motors | Integrated Designs | Centrifugal Blower Assembly BWM028D15

Centrifugal Blower Assembly BWM028D15

Integrated Brushless Motor/Drive System Assembly

Enviromental Specifications
  • Withstand the vibration spectra described in MIL-STD-810E Method 514.4 1-3.4.7 Category 8 - Ground Mobile.
  • Withstand a sinusoidal impulse with the following characteristics: 0ms / 0g, 100ms / 5g, 200ms / 0g and settled to 0g by 500ms.
  • Withstand sea/salt spray requirements described in MIL-STD810E method 509.3 Procedure I.
  • Humidity: Withstand 10 cycles of exposure to 95% ± 5% humidity at ambient temperatures of 20° C to 48.9°C per MIL-STD-810D, method 507.2, procedure III.
  • Dust: Withstand exposure to dust and blowing dust per MIL-STD-810D, Method 510.2, procedure I.
  • Electrical Environment: Survive in and comply with the electrical characteristics as specified in MIL-STD-1275.
  • EMI Compatibility: Comply with MIL-STD-461D, as defined below.
    • CE-102-Conducted Emissions.
    • CS-114-Conducted Susceptibility.
    • CS-116-Conducted Susceptibility.
    • RE-102-Radiated Emissions.
    • RS-103-Radiated Susceptibilit

Contact Us about this motor

Specifications

Parameter Unit Value
Input Voltage VDC 20 - 36
Input Current at Full Speed ADC 28 VDC 10ADC Max
20 VDC 15 ADC Max
Quiescent Input Current mADC 100
Control Signal for Pin B V 28
Startup Time (to 90% of full speed) s 7.5
Operating Temperature -40 to 85